High Energy Electron Beam Treatment Planning for Betatron 10-24 MeV
نویسندگان
چکیده
منابع مشابه
Energy device for monitoring 4-10 MeV industrial electron accelerators
The electron beam energy is one of the critical parameters of electron accelerators since it can affect the dose distribution inside the body or in products to be irradiated with a beam of energetic electrons. A device has been developed for monitoring small variations in the electron beam energy that is easy-to-use during an irradiation run. It involves measurement of currents (or charges) col...
متن کاملThe effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers
HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air at room temperature at 25, 50, 75, 100 and 125 kGy dose ranges to induce a network structure. HDPE crosslinking was studied on the basis of gel content measurements. The fibers w...
متن کاملAlanine-EPR dosimetry in 10 MeV electron beam to optimize process parameters for food irradiation
Absorbed dose in food product is determined and controlled by several parameters of the LINAC irradiation facility as well as those of the product. Standardization of the parameters characterizing the facility parameters, process load and the irradiation conditions collectively termed as ‘process parameters’ are important for successful dose delivery to the food products. In the present study, ...
متن کاملNanolithography by high energy electron beam
2014 The theoretical advantages of high energy beam (E0 = 100 keV) in electron lithography in the nanometer range ( 0.1 03BCm) are discussed. Using a Monte Carlo model, the different contributions at energy deposit in the PMMA resist are separated and the influence of each of them on the final resolution is analysed. Revue Phys. Appl. 23 (1988) JUILLET 1988, PAGE 1317 Classification Physics Abs...
متن کاملChemical cross linking versus high energy electron beam cross linking of HDPE: electrical properties study
Cross linking of high density polyethylene (HDPE) was first performed via high energy10 Mev electron beam (EB) irradiation. HDPE was also cross linked withDicumyle peroxide (DCP).The gel content of samples was determined by solvent extraction.Degree of cross linking was evaluated by hot set apparatus; as well .In order to clarify the effectof nature of cross linking, correlation of electrical p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Radiologica: Therapy, Physics, Biology
سال: 1970
ISSN: 0567-8064
DOI: 10.3109/02841867009129091