Heterojunction Solar Cells

Heterojunction silicon microwire solar cells.

We report radial heterojunction solar cells of amorphous silicon on crystalline silicon microwires with high surface passivation. While the shortened collection path is exploited to increase the photocurrent, proper choice of the wire radius and the highly passivated surface prevent drastic decrease in the voltage due to high surface-to-volume ratio. The heterojunction is formed by depositing a...

Stability of graphene-based heterojunction solar cells

Bulk-heterojunction (BHJ) solar cells based on organic small molecules and polymers are the focus of increasing attention by science and commerce. In organic photovoltaic devices, a conjugated polymer layer is used as the donor, while a fullerene-based derivative is used as the acceptor. Poly(3,4ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is one of the most common interfacial ma...

Bulk Heterojunction Solar Cells — Opportunities and Challenges

Texturing for Heterojunction Silicon Solar Cells

Heterojunction solar cells have potential for very high device voltages and currents, yet this relies on correct preparation of wafer surfaces prior to a-Si deposition. This paper investigates the preparation of wafer surfaces by NaOH texturing prior to amorphous silicon intrinsic layer deposition. It is found that with a CP etch or low temperature anneal after texturing, and with correct depos...

Defect Spectroscopy on CIGSSe-Based Heterojunction Solar Cells

The changes of defect characteristics induced by accelerated lifetime tests on solar cells of the heterostructure ZnO/CdS/Cu(In,Ga)(S,Se)2/Mo are investigated. Encapsulated modules were shown to be stable against water vapor and oxygen under outdoor conditions, whereas the fill factor and open-circuit voltage of non-encapsulated test cells are reduced after prolonged damp-heat treatment in the ...