Heterogeneous Deformation in a Commercially Pure Titanium Sheet under Dwell Fatigue Loading: Crystal Plasticity Modeling and Experiment
نویسندگان
چکیده
منابع مشابه
Ratcheting crystal plasticity modeling in microstructure of magnesium alloy under stress-controlled cyclic tensile loading with non-zero mean stress
Todays, the requirement of lowering the vehicle weight for the reduction of the fuel consumption and emissions, one of the methods considered by designers is to use the ligh magnesium alloy under cylclic loadings. In this article, considering the microstructure of the AZ91D magnesium alloy, its crystalline structure, a model for predicting the ratcheting behavior of this alloy was adapted and v...
متن کاملEnhanced superplasticity in commercially pure titanium alloy
The superplasticity of commercially pure titanium alloy at high temperature was studied and the dynamic recrystallization phenomenon of the alloy was investigated by using electron back scattered diffraction. A two-step deformation method was used to increase the ductility of the alloy from 188% to 243%. 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
متن کاملDental implant materials: commercially pure titanium and titanium alloys.
Manufacturers use six different titanium-based biomaterials to fabricate dental implants. Each of these materials, including four grades of commercially pure titanium and two titanium alloys, has distinct mechanical and physical properties. Clinicians should recognize these differences for optimal treatment planning and patient care.
متن کاملMechanical Properties of Commercially Pure Titanium Grade 2 after Severe Plastic Deformation
Mechanical properties and microstructures of commercially pure titanium (CP-Ti) developed by a newly designed multi-pass equal channel angular pressing (ECAP) process and cold drawing were investigated. The ECAP apparatus was developed in order to improve the efficiency of common ECAP and the performance of finished products. A much stronger CP-Ti billet was produced by using the proposed proce...
متن کاملThe effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations
This study combines nanoindentation, electron backscatter diffraction (EBSD) and crystal plasticity finite element analysis to examine the anisotropy in the indentation behaviour of individual grains within an α-Ti polycrystal. Nanoindentation is utilized to mechanically probe small volumes of material within grains for which orientations are known from prior EBSD mapping. Both indentation modu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Isij International
سال: 2021
ISSN: ['0915-1559', '1347-5460']
DOI: https://doi.org/10.2355/isijinternational.isijint-2020-702