Heat Transfer and Friction Studies in a Tilted and Rib-Roughened Trailing-Edge Cooling Cavity with and without the Trailing-Edge Cooling Holes
نویسندگان
چکیده
منابع مشابه
Study of Trailing-Edge Cooling Using Pressure Sensitive Paint Technique
An experimental investigation was conducted to study the effects of blowing ratio and the existence of lands on the film cooling effectiveness of a turbine blade trailing-edge model. Instead of using a temperature-based technique, a mass transfer analogywas used to quantify the film cooling effectiveness. This was done through themeasurement of the distribution of oxygen concentration over the ...
متن کاملAn experimental investigation on the trailing edge cooling of turbine blades
ational Laborator 016/j.jppr.2012.10 thor. [email protected] r responsibility o ronautics, China. Abstract An experimental study was conducted to quantify the flow characteristics of the wall jets pertinent to trailing edge cooling of turbine blades. A high-resolution stereoscopic particle image velocimetry (PIV) system was used to conduct detailed flow field measurements to quantitatively visua...
متن کاملSimulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade
In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...
متن کاملStatistical Estimation of Turbulent Trailing Edge Noise
A new computational aeroacoustic model suitable for the prediction of turbulent airfoil trailing edge noise is presented. The method (known as the RANS based Statistical Noise Model or RSNM) combines numerically generated, mean turbulence information with a Green’s function for a semi-infinite half-plane to generate a far-field acoustic auto-spectrum. As a preliminary application of the method,...
متن کاملLES tests on airfoil trailing edge serration
In the present study, a large number of acoustic simulations are carried out for a low noise airfoil with different Trailing Edge Serrations (TES). The Ffowcs Williams-Hawkings (FWH) acoustic analogy is used for noise prediction at trailing edge. The acoustic solver is running on the platform of our in-house incompressible flow solver EllipSys3D. The flow solution is first obtained from the Lar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Rotating Machinery
سال: 2014
ISSN: 1023-621X,1542-3034
DOI: 10.1155/2014/710450