Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling
نویسندگان
چکیده
منابع مشابه
Dual-color mixing for fused deposition modeling printers
In this work we detail a method that leverages the two color heads of recent low-end fused deposition modeling (FDM) 3D printers to produce continuous tone imagery. The challenge behind producing such two-tone imagery is how to finely interleave the two colors while minimizing the switching between print heads, making each color printed span as long and continuous as possible to avoid artifacts...
متن کاملCurved Layer Fused Deposition Modeling
Current Fused Deposition Modeling (FDM) technologies deposit material as flat layers. The result is a “stair-case” effect on non-vertical or horizontal surfaces, and compromised part strength because of weakness between the laminations. This paper describes a FDM method through which layers of build material are deposited as curved layers following the shape of the part, thus removing the stair...
متن کاملFused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications
In this work, the use of fused deposition modeling (FDM) in a (bio)analytical/lab-on-a-chip research laboratory is described. First, the specifications of this 3D printing method that are important for the fabrication of (micro)devices were characterized for a benchtop FDM 3D printer. These include resolution, surface roughness, leakage, transparency, material deformation, and the possibilities...
متن کاملExtruder path generation for Curved Layer Fused Deposition Modeling
Extruder path generation for a new rapid prototyping technique named “Curved Layer Fused Deposition Modeling” (CLFDM) has been presented. The prototyping technique employs deposition of material in curved layers in contrast to flat layers as in Fused Deposition Modeling (FDM). The proposed method would be particularly advantageous over FDM in the manufacturing of thin, curved parts (shells) by ...
متن کامل3D Printing by Fused Deposition Modeling of Capsular Devices for Oral Pulsatile Release Based on Swellable/Erodible Polymers
Swellable/Erodible Polymers A. Melocchi , F. Parietti , F. Casati , A. Maroni , A. Gazzaniga , L. Zema 1 1 Universita Degli Studi di Milano, 2 Massachusetts Institute of Technology Purpose To prepare swellable/erodible capsular devices for oral pulsatile release via 3D printing by Fused Deposition Modeling (FDM), starting from in-house produced filaments based on hydroxypropyl cellulose (HPC), ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computers & Graphics
سال: 2018
ISSN: 0097-8493
DOI: 10.1016/j.cag.2018.04.006