Hardness test for weld. (1).

The Acoustic Emission for Monitoring the Hardness of the Cold Metal Transfer Weld

ŠUSTR MICHAL, DOSTÁL PETR, ZAČAL JAROSLAV. 2016. The Acoustic Emission for Monitoring the Hardness of the Cold Metal Transfer Weld. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(2): 543–547. The article deals with the quality monitoring of the weld joint Aluzinc surface at the overlap point. The corrosion resistance layer research in the anaerobic fermenter (bioreac...

CATIA - Weld Design 1 (WD1)

A Fiber Detector Radiation Hardness Test

An intense 146 MeV/c pion beam was stopped inside a scintillating fiber detector made out of 12 planes with 16 pixels each, where every pixel consists out of 8 × 8 scintillating fibers of 500 μm diameter dense packed. The detector was irradiated for 52 hours to more than 1 Mrad at its center. Before and directly after the irradiation the detector has been exposed to a particle beam to compare t...

Weld for Itanium Processor

Sharma, Saurabh Weld for Itanium Processor (Under the direction of Dr. Thomas M. Conte) This dissertation extends a WELD for Itanium processors. Emre Özer presented WELD architecture in his Ph.D. thesis. WELD integrates multithreading support into an Itanium processor to hide run-time latency effects that cannot be determined by the compiler. Also, it proposes a hardware technique called operat...

An Non Destructive Test for the Detection of Weld Defects Using Image Processing

Received Sep 9, 2017 Revised Dec 20, 2017 Accepted Jan 7, 2018 Welding is a fabrication of joining materials into one component. Defects are unavoidable during the welding process, and hence the inspection of welds is a most important task in many industries. In this work, a Computer Aided Detection (CAD) system is designed to detect weld defects based on image processing techniques. It is a no...