Growth and Characterization of Co-Doped Fluorine and Antimony in Tin Oxide Thin Films Obtained by Ultrasonic Spray Pyrolysis
نویسندگان
چکیده
منابع مشابه
Fabrication and characterization of fluorine-doped thin oxide thin films and nanorod arrays via spray pyrolysis
This paper reports the synthesis and characterization of fluorine-doped tin oxide (FTO) thin films via intermittent spray pyrolysis utilizing a solution mixture of tin chloride pentahydrate and ammonia fluoride. Utilizing the same solution, nanorod arrays were fabricated via template-based growth. Uniform and crack-free FTO films over 20×20 mm with a thickness up to 900 nm have been routinely a...
متن کاملStructural and electrical properties of In-doped vanadium oxide thin films prepared by spray pyrolysis
The In-doped vanadium pentoxide nanostructures with different doping levels including 0, 10, 20 and 30 at.% were prepared by the spray pyrolysis technique. The prepared thin films were characterized by the x-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD results revealed that the films were crystalline in tetragonal phase. Increasing the In-doping level made the structure...
متن کاملPreparation and characterization of nanostructured S and Fe co-doped TiO2 thin film by ultrasonic-assisted spray pyrolysis method
Nanostructured TiO2 and S and Fe co-doped TiO2 thin films with high transparency were prepared on glass substrate through ultrasonic-assisted spray pyrolysis technique. The effects of doping on morphological, optical an...
متن کاملAntimony-doped Tin(II) Sulfide Thin Films
Thin-film solar cells made from earth-abundant, inexpensive, and non-toxic materials are needed to replace the current technologies whose widespread use is limited by their use of scarce, costly, and toxic elements. Tin monosulfide (SnS) is a promising candidate for making absorber layers in scalable, inexpensive, and non-toxic solar cells. SnS has always been observed to be a p-type semiconduc...
متن کاملDeposition and characterization of SnO2:Sb thin films fabricated by the spray pyrolysis method
In this study, thin films of transparent semiconductor tin oxide doped with antimony impurities on the glass substrates with different concentrations of antimony that have been prepared using spray pyrolysis method. The effects of different concentration of antimony on the structural, optical, and electrical properties of the thin films were investigated. Prepared layers were characterized by X...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Solid Mechanics and Materials Engineering
سال: 2007
ISSN: 1880-9871
DOI: 10.1299/jmmp.1.592