Grinding Optimization of Cassiterite-Polymetallic Sulfide Ore
نویسندگان
چکیده
منابع مشابه
Nickel ore grinding energy determination
This study describes the application of an empirical method to estimate the energy consumption in laboratory of the primary grinding of nickel ore with a specific mineralogical texture. This method developed by Donda was previously used in iron ore from the Iron Quadrangle (Minas Gerais, Brasil) with the same purpose. Through the grinding test, performed under standard conditions and based on t...
متن کاملOptimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching
In this work, the parameters affecting the recovery of copper from the low-grade sulfide minerals of Sarcheshmeh Copper Mine were studied. A low-grade sulfide ore was used with a copper grade of 0.25%, which was about 28% of the mineral oxide, and the sulfide minerals made up the rest. Much more sulfide minerals were found to be pyrite and most of the gangue minerals were quartz, anorthite, bio...
متن کاملState and Ore Hardness Estimation in Semiautogenous Grinding ?
Semiautogenous milling is difficult to control both because of its non-linear behavior and the effects of overloading due to increases in the ore charge or variations in ore characteristics. Advanced control strategies and operational change detection methods are thus in need of strengthening using techniques such as state estimation. Non-linear state estimation is a complex task for which vari...
متن کاملStudy of ore mineralization of polymetallic veins of the Qarah Changal area, northwest of Qazvin
The vein-type mineralization of the base (Zn, Pb, and Cu) and precious metals (Au) in the Qarah Changel area (northwest of Qazvin) is located in the southern part of the Tarom-Hashtjin metallogenic belt. Volcanic (trachy-andesite, rhyolite and dacite) and pyroclastic (tuff, tuffite and tuffaceous shale) (Eocene) rocks are the hosts of this mineralization. Distinctive alterations around minerali...
متن کاملDETERMINATION OF THE OPTIMUM CONDITIONS FOR RECOVERY OF GOLD FROM ZARSHURAN REFRACTORY GOLD SULFIDE ORE
The orthogonal array design has been used to determine the optimum conditions for gold recovery from Zarshuran refractory gold sulfide ore (Iran) by direct cyanidation and roasting-cyanidation. The Taguchi method was used as the experimental design to determine the optimum conditions of dissolution behavior of gold with cyanidation and roasting-cyanidation from Zarshuran refractory gold ore . T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Minerals
سال: 2019
ISSN: 2075-163X
DOI: 10.3390/min9020134