Geometrical reconstruction of high energy interactions in spark chamber magnet arrangements
نویسندگان
چکیده
منابع مشابه
Development of the Spark Chamber: A Review
A survey of the development of the spark chamber from the spark counter is given. An effort has been made to clarify the early history of the device. Some unpublished recent Russian work on spark chambers is summarized. A consistent terminology for the various times relevant to spark chamber operation is suggested.
متن کاملGeometrical Arrangements of a Collection of Bubbles
Abstrakt V tomto článku popíšeme počítačovú simuláciu dynamiky mydlových bublín tému, ktorá je zaujímavá pre mnohých matematikov a fyzikov. Najskôr popíšeme jednoduchú geometriu malých zoskupení a navrhneme dynamicky systém tvorby zoskupení bublín. V našom modely berieme do úvahy povrchové napätie, elastické deformácie a vonkajšiu silu. Predkladáme tiež metódy na výpočet spoločnej plochy medzi ...
متن کاملFabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering
Spark plasma sintering (SPS) is a sintering process that is capable of sintering hard worked powders in short times. This technique was used to fabricate bulk Cu and Cu-SiC nanocomposites. Pure Cu and mixed powders of Cu including 4 vol% of SiC nanoparticles were mechanically alloyed for 25 h and sintered at 750˚C under vacuum condition by SPS method. Microstructures of the materials were chara...
متن کاملEnergy Reconstruction with the Sweeper Magnet Focal Plane Detector
The Sweeper Magnet Focal Plane Detector project is a collaboration of the National High Magnetic Field Laboratory (NHMFL) at Florida State University and the National Superconducting Cyclotron Laboratory (NSCL) at Michigan State University. The NHMFL will construct the Sweeper Magnet, a large C-type magnet necessary for the bending of rigid nuclear beams. The NSCL will build the Focal Plane Det...
متن کاملElectrode Erosion in a High Energy Spark Gap*
The erosion rates for hemispherical electrodes, 2.5 em in diameter, made of graphite, copper-graphite, brass, two types of copper-tungsten, and three types of stainless steel have been examined in a spark gap filled with air or nitrogen at one atmosphere. The electrodes were subjected to 50,000 unipolar pulses (25 )ls, 4-25 kA, 5-30 kV, 0.1-0.6 Coul/shot) at repetition rates ranging from 0.5 to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Instruments and Methods
سال: 1966
ISSN: 0029-554X
DOI: 10.1016/0029-554x(66)90167-4