Fracture surface and acoustic emissions in high-alumina ceramics.
نویسندگان
چکیده
منابع مشابه
Surface Contamination of Alumina Ceramics by Carbon
Article history: Received: 01.05.2016. Received in revised form: 25.07.2016. Accepted: 06.09.2016. This study presents the results of investigating the cause of contamination of aluminum oxide ceramics (Al2O3) in the form of brown colored stain. Contaminated ceramic surfaces were examined with the scanning electron microscope (SEM) equipped with the Energy Dispersive Spectrometer (EDS). The res...
متن کاملSurface Acoustic Wave Measurements of Surface Cracks in Ceramics
We have extended our earlier investigation of scattering from surface cracks. In particular, we have studied the change in the reflection coefficient of a Rayleigh wave incident on a half-penny shaped surface crack along with the corresponding change in the acoustic crack size estimates as the cracked sample is stressed to fracture. We have examined in this manner both cracks in annealed sample...
متن کاملAcoustic Surface Wave Probing of Ceramics
We have developed a low frequency theory for scattering from surface cracks. For the case of halfpenny shaped surface cracks, we are able to relate the reflection coefficient of a Rayleigh wave incident on the crack with the crack size as well as the fracture stress of a sample with the crack in it. Comparisons of the theoretical predictions for the fracture stress with the actual fracture stre...
متن کاملMullite-alumina functionally gradient ceramics
Cracks free mullite-alumina Functionally Gradient Ceramics (FGC) have been obtained by sequential slip casting of Mullite-alumina slurries with diserent mullite/alumina ratios. These slurries were prepared with 65 % solids content and viscosities rangingpom 10 to 40 mPa.s. 7he presence of cracks perpendicular to the FGC layers have been attributed to residual stresses developed because of the m...
متن کاملAcoustic Emissions Produced by Discrete Fracture in Rock
An experimental programme was undertaken to develop a servo-controlled loading and high-fidelity data acquisition system to ~westigate acoustic emission (AE) waveforms produced during discrete fracture propagation in rock. Large (0.3 × 0.3 × I m) chevron-notched specimens were loaded in controlled conditions, and characteristic acoustic emissions associated with Mode I and Mode l l fracture wer...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1985
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.34.643