Fracture Strain and Strain Rate Sensitivity in Superplastic Materials
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...
متن کاملStrain Rate Effects in Metallic Cellular Materials
The high strain rate behavior of two cellular materials was investigated using a quasi-static loading stage and a Kolsky bar apparatus. The yield stress of these core materials under dynamic loading was found higher than in quasi-static loading. However, the plateau stress after yielding is not so sensitive to strain rate. For Aluminum foam materials, the deformation was more localized for quas...
متن کاملDamage and Fracture Behaviours in Aged Austentic Materials During High-Temperature Slow Strain Rate Testing
Biomass power plants with high efficiency are desired as a renewable energy resource. High efficiency can be obtained by increasing temperature and pressure. An upgrade of the material performance to high temperature material is therefore required in order to meet the increased demands due to the higher temperature and the more corrosive environment. In this study, the material’s high-temperatu...
متن کاملFracture transitions in iron: Strain rate and environmental effects
A number of recent mechanical property studies have sought to validate atomistic and multiscale models with matching experimental volumes. One such property is the ductile–brittle transition temperature (DBTT). Currently no model exists that incorporates both external and internal variables in an analytical model to address both length scales and environment. Using thermally activated parameter...
متن کامل/-Integral Estimates for Strain-Hardening Materials in Ductile Fracture Problems
A finite-element procedure is developed to analyze plane ductile fracture problems in the presence of largescale yielding near the crack tip. Strain and stress singularities near the crack tip, corresponding to the strainhardening material model, are embedded in elements near the crack tip. The developed elastic-plastic incremental finite-element method is based on a hybrid displacement model. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1982
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.46.2_205