Fracture-based interface model for NSM FRP systems in concrete

FRP Dowels for Concrete Pavements

A Paper for the World Wise Conference 1999 Winnipeg, Manitoba © November 15, 1999 Introduction Joints are used in concrete pavements in order to control cracking due to thermal and environmental conditions. Dowels span joints to transfer load from one slab to an adjacent slab and to provide vertical and horizontal alignment. Currently, smooth epoxy coated steel dowels are placed across transver...

Durability of the Bonding Performance of Frp-concrete Interface Externally Bonded with Frp Composite Sheet

The strengthening of concrete structures externally bonded with fiber reinforced polymer (FRP) sheet is increasingly being used for repair and rehabilitation of existing structures. This paper provides information in the area of long-term durability of FRP-concrete interface externally bonded with FRP composite sheet. It mainly discusses and summarizes the influence of harsh environmental expos...

Understanding and Assessment of Debonding Failures in FRP-Concrete Systems

Failures in FRP-strengthened reinforced concrete (RC) members may occur by flexural failures of critical sections or by debonding of FRP plate from the RC beams. Debonding in the FRP/adhesive/concrete interface region may cause a significant decrease in member capacity leading to a premature failure of the system. There is a need for improved knowledge of the debonding processes under mechanica...

FRP Shear Reinforcement for Concrete Structures

Durability of FRP rods for concrete structures

Over the last two decades fiber-reinforced polymer (FRP) rods have emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. The application of FRP rods in new or damaged structures requires the development of design equations that must take into account the mechanical properties and the durability properties of FRP pr...