Formation mechanisms of “ jellyroll” smelt in kraft recovery boilers
نویسندگان
چکیده
منابع مشابه
Mechanism and Prevention of Scale Formation in Boilers
Nucleate boiling heat transfer coefficients may be strongly reduced by scale formation, even for conditions where the bulk foulant concentration is well below the saturation concentration. Due to the mechanism of micro-layer evaporation, the local concentration at the heat transfer surface can be considerably increased, causing the formation of scale and changes in bubble frequency and bubble d...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولComputer Simulation of NOx Formation in Boilers
Understanding of how and where NOx formation occurs in industrial boiler is very important for efficient and clean operation of utility boilers. This study aims to numerically simulate the NOx formation using a 3D model furnace of an industrial boiler. The studied boiler is a 160 MW and is gas fired with natural gas. The boiler combustion model is a 3D problem that involves turbulence, combusti...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Simulation of Oil Reservoirs Driving Indices and Recovery Mechanisms
Different recovery mechanisms are activated during the production from reservoirs. Wells sometimes are kept with the injection. Therefore the evaluation of injection indices depended on material injection, seems to be necessary. This study is going to determine the drive indices for a reservoir by making a model using Eclipse. The model consists a gas cap and aquifer, in which there is an injec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TAPPI Journal
سال: 2017
ISSN: 0734-1415
DOI: 10.32964/tj16.10.597