Formation Mechanism of Freckle in Unidirectional Solidification
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولStudy on Unidirectional Solidification Ingot with Hollow Lateral Wall Insulation
G. W. Ao, M. G. Shen, Z. S. Zhang, B. L. Li: College of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan City, China Hollow side wall insulation mathematical model of unidirectional solidification temperature field was carried out. With the aid of finite element analysis software ProCAST, directionally solidified ingot temperature field with hollow lateral wall in...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Mechanism and Prevention of Scale Formation in Boilers
Nucleate boiling heat transfer coefficients may be strongly reduced by scale formation, even for conditions where the bulk foulant concentration is well below the saturation concentration. Due to the mechanism of micro-layer evaporation, the local concentration at the heat transfer surface can be considerably increased, causing the formation of scale and changes in bubble frequency and bubble d...
متن کاملSolidification Mechanism of Hickly Undercooled Metal Alloys
This paper describes the results of experiments on metal droplet undercooling, and presents a preliminary analysis of the structures obtained. Work was conducted with Sn-25wt%Pb and Ni-34wt%Sn alloys. To achieve the required high degrees of undercooling, emuls i fication treatments were utilized following techniques described-by Perepezko and co-workers. Experiments show the fraction of supersa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1988
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.74.2_310