Flux Cored Wire for Fatigue Strength Improvement, SX-1LD
نویسندگان
چکیده
منابع مشابه
Experimental and 3D Finite Element Analysis of a Slotless Air-Cored Axial Flux PMSG for Wind Turbine Application
In this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3D finite element modeling and experimental tests. The structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...
متن کاملRebond strength of bonded lingual wire retainers.
There is no consensus in the literature concerning the rebonding procedure for orthodontic retainers. The aim of this in vitro study was to evaluate the bond and rebond strength of retainers bonded to enamel surfaces with and without composite remnants. The retainers were bonded with Excite and Tetric Flow on three different surfaces: clean enamel, enamel where the composite had been removed by...
متن کاملSensitivity model for prediction of bead geometry in underwater wet flux cored arc welding
To investigate influence of welding parameters on weld bead geometry in underwater wet flux cored arc welding (FCAW), orthogonal experiments of underwater wet FCAW were conducted in the hyperbaric chamber at water depth from 0.2 m to 60 m and mathematical models were developed by multiple curvilinear regression method from the experimental data. Sensitivity analysis was then performed to predic...
متن کاملImprovement of Fatigue Strength of Light Metallic Materials by Cavitation Shotless Peening
Cavitation normally causes severe damage in hydraulic machinery such as pumps, valves and so on. However, cavitation impact can be utilized to surface treatment to improve fatigue strength of metallic materials in the same way as shot peening. A peening method using cavitation impact was named as “cavitation shotless peening” or “cavitation peening” as shots are not required. As increase of sur...
متن کاملCritical Plasma Processing Parameters for Improved Strength of Wire Bonds
Bond pad cleaning, prior to wire bonding, through the employment of radio-frequency-driven, lowpressure plasmas has been demonstrated to improve the wire bond pull strength.1 The successful application of plasma technology relies on an optimization of process parameters including process pressure, plasma power, time, and process gas type. These key plasma process parameters and their impact on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2009
ISSN: 0021-4787,1883-7204
DOI: 10.2207/jjws.78.244