Flow Assurance Improvement by Injecting Pour Point Depressant Chemical through Permanent Coiled Tubing Gas Lift to Heavy Oil at MM-1 Well at MPA Field
نویسندگان
چکیده
The majority artificial lift used in MPA Field use PCTGL (Permanent coil tubing gas lift). is installed on several monobore well or dual well. Some wells the have waxy HPPO oil character with pour point between 85-100oF API 30-35. "MM-1" has a 95oF. high Pour of will be problem to solved. MM-1 produced PCTGL. From simulation, design was obtained at depth 2250 ft. With oil, depressant injection optimization also carried out along so that chemical can work from downhole. results bottle test concentration 1000 ppm reach target. field showed Point Depressant 1026 able change up 65oF. production increase 290 bopd.
منابع مشابه
Stabilizing gas - lift well dynamics with free operating point ⋆ ⋆
Gas-lift is one of the most used artificial lift methods worldwide. In Brazil it responds for more than 70% of the total oil production. Gas-lift wells are known to present oscillatory behavior associated with phenomena like heading and density wave. This work presents an innovative way to control these oscillations. The approach adopted controls the well dynamics without fixing any operational...
متن کاملAN IMPROVEMENT TO PHYSICAL PROPERTIES OF HEAVY-WEIGHT OIL WELL CEMENTS USING CARBON NANOTUBES
This study experimentally investigates the effect of multi-walled carbon nanotubes (MWNT’s), as a reinforcing material, on the physical properties of heavy-weight oil well cements. A candidate well is selected and the properties of the cement slurry used in a problematic section of the well are tested in the laboratory. Carbon nanotubes (CNT’s) are added as fibers to the cement slurry and the i...
متن کاملDeveloping a Novel Temperature Model in Gas Lifted Wells to Enhance the Gas Lift Design
In the continuous gas lift operation, compressed gas is injected into the lower section of tubing through annulus. The produced liquid flow rate is a function of gas injection rate and injection depth. All the equations to determine depth of injection assumes constant density for gas based on an average temperature of surface and bottomhole that decreases the accuracy of gas lift design. Also g...
متن کاملOptimization of lift gas allocation in a gas lifted oil field as non-linear optimization problem
Proper allocation and distribution of lift gas is necessary for maximizing total oil production from a eld with gas lifted oil wells. When the supply of the lift gas is limited, the total available gas should be optimally distributed among the oil wells of the eld such that the total production of oil from the eld is maximized. This paper describes a non-linear optimization problem with constra...
متن کاملControl of corrosion in oil and gas production tubing
L. SMITH Controlling corrosion in production tubing is essential for maintaining production and for preventing loss of well control. Materials for use downhole have to meet criteria for corrosion resistance and also mechanical requirements. The potential corrosion rate can be estimated and the risks of sulphide stress corrosion cracking assessed on the basis of the anticipated environmental con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Petroleum and Geothermal Technology
سال: 2023
ISSN: ['2723-1496', '2723-0988']
DOI: https://doi.org/10.31315/jpgt.v4i1.8717