Flexural performance of conventional and reactive powder concrete built–up beams
نویسندگان
چکیده
منابع مشابه
High Performance Reinforced Concrete Beams made with Sandstone Reactive Aggregates
An investigation on the flexural behaviour of reinforced high performance concrete (HPC) has been conducted. Crushed sandstone known as reactive aggregate was used for both fine and coarse aggregates. In addition, mineral admixtures such as silica fume and fly ash combined with superplasticiser was used. The beams were made with concrete having compressive strength in the range of 74 88 N/mm 2 ...
متن کاملFlexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets
The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...
متن کاملFlexural Fatigue Strength of Steel Fibre Reinforced Concrete Containing Blends of Limestone Powder and Silica Fume
Based upon the statistical distribution of flexural fatigue life data and flexural fatigue strength of the steel fibre reinforced concrete (SFRC) containing blends of limestone powder (LP) and silica fume (SF), the influence of these inserts on the flexural fatigue performance of concretes is probed. Concrete mixes were proportioned to replace 30% cement with these mineral inserts in different ...
متن کاملFlexural Behavior of Lightweight Concrete Beams Reinforced with GFRP Bars and Effects of the Added Micro and Macro Fiber
This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...
متن کاملFlexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections
The sections composed of concrete and steel, which include concrete-encased concrete-filled tubes, generally have defects due to the low tensile strength of concrete. Therefore, an appropriate method was used for the combination of concrete-filled tubes (CFT) and prestressing strands which is encased in concrete. The conventional design guidelines are commonly developed for materials with norma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/737/1/012024