Fireside Corrosion in Oxy-fuel Combustion of Coal

Oxy - fuel combustion of coal and biomass blends

The ignition temperature, burnout and NO emissions of blends of a semi-anthracite and a high-volatile bituminous coal with 10 and 20 wt.% of olive waste were studied under oxy-fuel combustion conditions in an entrained flow reactor (EFR). The results obtained under several oxy-fuel atmospheres (21%O2-79%CO2, 30%O2-70% CO2 and 35%O265%CO2) were compared with those attained in air. The results in...

Oxy-coal Combustion Studies

Effects of nitrogen content in fuel on NOX emissions under oxy-fuel coal combustion

Oxy-fuel coal combustion with flue gas re-circulation is known to be one of the most promising methods for reducing CO2 emissions from coal combustion power plants. In the oxy-fuel system, the combustion atmosphere consists of only O2 separated from air and flue gas re-circulated from a stack. Therefore, the flue gas is dominated by CO2 without any nitrogen gas. The most attractive potential as...

Development of Fireside Corrosion Models for Advanced Combustion Systems

A comprehensive fireside corrosion project was undertaken to better understand the corrosion mechanisms operating on the lower furnace walls and superheaters in modern coal-fired utility boilers. Eight U.S. coals commonly burned in boilers have been selected to represent a wide range of coal chemistry. These coals will be burned in a pilot-scale combustion facility to closely simulate the actua...

Fireside Corrosion of Alloys for Combustion Power Plants

A program on fireside corrosion is being conducted at Argonne National Laboratory to evaluate the performance of several structural alloys in the presence of mixtures of synthetic coal ash, alkali sulfates, and alkali chlorides. Candidate alloys are also exposed in a small-scale coal-fired combustor at the National Energy Technology Laboratory in Pittsburgh. Experiments in the present program, ...