Finite Element Simulation of the Dissassembly Process of Pipe Flange Connections.
نویسندگان
چکیده
منابع مشابه
A Stress Analysis of Pipe Flange Connections
The use of pipe flange connections is standardized in the codes of JIS, ASME, DIN and so on. However, these codes are almost entirely dependent on experience, and subsequently some problems concerning pipe flange connections have been encountered. In the present paper, the distribution of contact stresses which governs the sealing performance is analyzed as a three-body contact problem, using a...
متن کاملFinite Element Simulation of Dental Implantation Process
Using the finite element procedure, the insertion process of a dental implant into a section of the mandible is analysed. Elevated stress concentrations in both cancellous and cortical bone are examined during implantation. An implant of length 11mm is inserted at 1mm increments into the mandible. The torque applied to the implant top ranges from 0 to 450Nmm for a total time period of 36 second...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
SIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
n this paper a finite element model has been proposed for evaluation of primary and secondary current density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the nickel sulfate solution. Nickel electroplating experi...
متن کاملFinite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2002
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.68.1622