Feedstock recycling of waste polymers by thermal cracking in molten metal: thermodynamic analysis
نویسندگان
چکیده
منابع مشابه
suppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولNovel waste printed circuit board recycling process with molten salt
The objective of the method was to prove the concept of a novel waste PCBs recycling process which uses inert, stable molten salts as the direct heat transfer fluid and, simultaneously, uses this molten salt to separate the metal products in either liquid (solder, zinc, tin, lead, etc.) or solid (copper, gold, steel, palladium, etc.) form at the operating temperatures of 450-470 °C. The PCB rec...
متن کاملIn-flight thermal control of molten metal droplet streams
Precision droplet manufacturing (PDM) is a process that builds complex 3D parts one nano-liter molten metal droplet at a time from a CAD file without the need for tooling. One method to control the droplet temperature when it arrives at the target is to heat the droplets in-flight. This note describes such a heater that uses helium and nitrogen as the convective heat transfer medium. Heating ra...
متن کاملRecycling of polymers by pyrolysis
The pyrolysis of plastic waste, scrap tires and other polymeric materials in a fluidized bed has been carried out based on a scale up program (laboratory plants 70 g/h, 500 g/h, 3000 g/h, and pilot plant 20-50 kg/h). The fluidized bed shows short residence times and high heat and mass transfers, and is heated indirectly up to 600 800 OC. In the case of poly(methylmethacry1ate) (PMMA) or polysty...
متن کاملLow Temperature Catalytic Cracking of Heavy Feedstock Optimized by Response Surface Method
Upgrading of cracked PFO (Pyrolysis fuel oil) for production of fuels, such as gasoline and light gasoil, was carried out in a semi batch reactor. Two different kinds of mesoporous and microporous catalysts, MCM-41 and ZSM-5, were used. Modification methods, such as ion exchange and impregnation with Fe and Ti, were done for tuning the acidity of the catalyst. XRD, FT-IR, and XRF analyzes were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Material Cycles and Waste Management
سال: 2013
ISSN: 1438-4957,1611-8227
DOI: 10.1007/s10163-013-0178-x