Fatigue Strength Evaluation for Aluminum Alloy A6061-T6 Based on Dissipated Energy Measurement
نویسندگان
چکیده
منابع مشابه
Effect of Welding Conditions of Spot Welded Zone on the Tensile Strength about Aluminum Alloy (A6061)
It is considered to be available in reducing the weight of automobiles that the aluminum alloy is applied to manufacture them. The spot welding of aluminum alloys is difficult because of high welding current and small electrical resistance. It is necessary to clarify the relation between the nugget formation and the welding conditions. In this study, the relation between the spot welding condit...
متن کاملFatigue Evaluation in Hot and Warm mix asphalts Based on Dissipated Energy
Warm mix asphalts (WMA), because of their low production and compact temperatures, may have different behaviors in long term. In the present work, the energy-based criteria along with the 50% reduction in initial stiffness (Nf50%) using four-point bending test under controlled-strain conditions of 1000 microstrain were applied to compare the prepared two warm mix and HMA samples. All these crit...
متن کاملFatigue Strength Estimation Based on Local Mechanical Properties for Aluminum Alloy FSW Joints
Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW) joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that f...
متن کاملEvaluation Model of Aluminum Alloy Welded Joint Low-Cycle Fatigue Data Based on Information Entropy
An evaluation model of aluminum alloy welded joint low-cycle fatigue data based on information entropy is proposed. Through calculating and analyzing the information entropy of decision attributes, quantitative contribution of stress concentration, plate thickness, and loading mode to the fatigue destruction are researched. Results reveal that the total information entropy of the fatigue data b...
متن کاملEffect of Heat Input on Tensile Properties of Friction Stir Welded AA6061-T6 and AA7075-T6 Dissimilar Aluminum Alloy Joints
Friction Stir Welding (FSW) is a solid state process widely used to join dissimilar aluminium alloys. High quality and strength joints can be fabricated using this technique when compared to other conventional methods. The welding parameters play major role in determining the quality of the weld. This paper aims in presenting the effect of heat input on tensile properties of the joints between ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2018
ISSN: 0514-5163,1880-7488
DOI: 10.2472/jsms.67.1036