Fatigue equation for asphalt mixture under low temperature and low loading frequency conditions

Linkage between Ductile Fracture and Extremely Low Cycle Fatigue of Inconel 718 under Multiaxial Loading Conditions

Ductile fracture and extremely low cycle fatigue (ELCF) [1] are two common failure modes in aircraft engines and turbomachinery designs [2]; however, the linkage between these two failure modes under multi-axial loading conditions has never been systematically studied. Inconel 718 (IN718) is one type of high temperature alloys widely used in turbomachines. Specially designed specimens and tests...

Low Cycle Fatigue Testing of Ball Grid Array Solder Joints under Mixed-Mode Loading Conditions

To give a proper and accurate estimation of the fatigue life of ball grid array (BGA) solder joints, a mechanical fatigue test method under mixed-mode loading is proposed. Experiments were conducted with 63Sn/37Pb and Sn/3.5Ag/0.75Cu solder joints in room temperature. The mechanical low cycle fatigue tests were performed under several loading angles. The loading angle is controlled by several g...

Evaluation of Asphalt Mixture Low-Temperature Performance in Bending Beam Creep Test

Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test...

Boltzmann-Equation Simulations of Radio-Frequency-Driven, Low-Temperature Plasmas

Laboratory Evaluation of High Asphalt Binder Replacement with Recycled Asphalt Shingles (ras) for a Low N-design Asphalt Mixture

This study investigated the effect of high asphalt binder replacement for a low N-design asphalt mixture including RAP and RAS on performance indicators such as permanent deformation, fracture, fatigue potentials, and stiffness, was studied. An experimental program included complex modulus, fracture, overlay reflective cracking resistance, wheel track permanent deformations, and push-pull fatig...