Failure Mechanisms of Interlocked Bricks of Soil-Cement and Wood Fibers
نویسندگان
چکیده
منابع مشابه
Behaviour of Masonry Wall Constructed using Interlocking Soil Cement Bricks
According to the masonry standard the compressive strength is basically dependent on factors such as the mortar strength and the relative values of unit and mortar strength. However interlocking brick has none or less use of mortar. Therefore there is a need to investigate the behavior of masonry walls using interlocking bricks. In this study a series of tests have been conducted; physical prop...
متن کاملinvestigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers
امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...
Assessment the Mechanical Properties of Soil Cement Interlocking (SCI) Bricks: A Case Study in Malaysia
Received Apr 3, 2012 Revised May 19, 2012 Accepted June 4, 2012 The research assessed and examined the mechanical properties of the Soil Cement Interlocking brick (SCI) to provide the information for the possible and appropriate development and revision of the (SCI) brick due to the substantial benefits which can be obtained by improving these sorts of bricks .Therefore, drastic efforts and acc...
متن کاملInvestigation of the Effect of high Alumina Cement on the Properties of Foamed Alumina Insulation Bricks
The purpose of this study was to investigate the effect of high alumina cement and Sintering temperature on microstructure, physical and mechanical properties of foamed alumina insulation bricks. The Slurry samples were prepared containing 75wt% of alumina and 25% wt of deionised water containing 1%, 3%, 5%, 7% wt% high Alumina cement and 2% wt% foam. Then samples were poured into metal molds....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Advanced Engineering Research and Science
سال: 2019
ISSN: 2349-6495,2456-1908
DOI: 10.22161/ijaers.6.5.6