Fabrication of Dye-doped Polymer Organic Light-Emitting Devices using Tin-doped Indium Oxide Anodes Deposited by Spray-CVD

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Excitation mechanisms in dye-doped organic light-emitting devices

In an organic light-emitting device with a polymeric matrix concurrently doped with two different dyes, the photoluminescence ~PL! and electroluminescence ~EL! spectra are observed to be very different, with both dyes emitting in PL and only one in EL at room temperature. A simple model based on charge trapping and thermal excitation is introduced to explain this observation. The EL spectral ch...

متن کامل

Degradation mechanism of phosphorescent-dye-doped polymer light-emitting diodes

The degradation mechanism of phosphorescent-dye-doped polymer light-emitting diodes ~PLEDs! is investigated. The active medium of our PLED is a polymer blend comprising poly~vinylcarbazole! ~PVK!, @2-~4-biphenylyl!-5-~4-tert-butyl-phenyl!-1,3,4-oxadiazole# ~t-PBD!, and platinum~II!-2,8,12,17-tetraethyl-3,7,13,18-tetramethylporphyrin ~PtOX!. The cyclic voltammetry result shows that the reductive...

متن کامل

UV light emitting transparent conducting tin-doped indium oxide (ITO) nanowires.

Multifunctional single crystalline tin-doped indium oxide (ITO) nanowires with tuned Sn doping levels are synthesized via a vapor transport method. The Sn concentration in the nanowires can reach 6.4 at.% at a synthesis temperature of 840 °C, significantly exceeding the Sn solubility in ITO bulks grown at comparable temperatures, which we attribute to the unique feature of the vapor-liquid-soli...

متن کامل

Tin doped indium oxide anodes with artificially controlled nano-scale roughness using segregated Ag nanoparticles for organic solar cells

Nano-scale surface roughness in transparent ITO films was artificially formed by sputtering a mixed Ag and ITO layer and wet etching of segregated Ag nanoparticles from the surface of the ITO film. Effective removal of self-segregated Ag particles from the grain boundaries and surface of the crystalline ITO film led to a change in only the nano-scale surface morphology of ITO film without chang...

متن کامل

Tin-doped indium oxide thin films deposited by sol–gel dip-coating technique

Indium tin oxide (ITO) thin films were prepared by the sol–gel dip-coating (SGDC) technique. The microstructure and electrical properties of ITO thin films crystallized using rapid thermal annealing (RTA) were compared with those of films prepared by classic thermal annealing (CTA). ITO thin films were successfully prepared by CTA at 500 jC for 30–60 min. At the same temperature of 500 jC and w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: KOBUNSHI RONBUNSHU

سال: 2006

ISSN: 0386-2186,1881-5685

DOI: 10.1295/koron.63.691