Fabrication and characterization of novel nitinol particulate reinforced aluminium alloy metal matrix composites (NiTip/AA6061 MMCs)
نویسندگان
چکیده
منابع مشابه
Characterization Of Particulate-Reinforced Aluminium 6061 / Boron Carbide Composites
Aluminum-based metal matrix composite (MMC) materials are used in the design of ground transportation vehicles and aircraft. Compared with conventional, unreinforced alloys, composite materials usually exhibit higher strength, both at ambient and elevated temperatures, as well as good fatigue strength and wear resistance. MMCs could be produced by variety of methods such as Stir cast, Liquid In...
متن کاملPreparation and Characterization of B 4 C Particulate Reinforced Al - Mg Alloy Matrix Composites
This paper describes the fabrication and mechanical testing of Al-Mg-boron carbide particulate composites using stir casting technique. The size of the boron carbide particulates is ranging between 30 to 100 μm. The boron carbide contents are varied from 3 and 7% by weight and are dispersed in the alloy matrix. The mechanical properties of the castings, particularly their tensile properties and...
متن کاملFracture Analysis of Particulate Reinforced Metal Matrix Composites
A fracture analysis of highly loaded particulate reinforced composites was performed using laser moire interferometry to measure the displacements within the plastic zone at the tip of an advancing crack. Ten castings were made of five different particulate reinforcement-aluminum alloy combinations. Each casting included net-shape specimens which were used for the evaluation of fracture toughne...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملFabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
Mechanical alloying is a powder metallurgy processing technique involving cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. In this work, NiFe-TiC composite powders were prepared by mechanical alloying process using planetary high-energy ball mill. The effect of TiC addition by weight percent on the NiFe solid solution formation, grain size, lattice paramet...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2021
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2020.09.326