EXPERIMENTAL STUDY ON CLT SEISMIC PANEL INFILLED WITHIN STEEL FRAME
نویسندگان
چکیده
We have developed the new hybrid structure of CLT infill and steel frame for middle-rise high-rise buildings. This structural system can achieve high potential panel by holding around with frame. Steel support sustained load a building without panels build long-span beams reasonably. Compression stress seismic be transmitted to upper bottom through strength mortal layer, secure shear as boundary beams. Shear is drift pined joints insert-steel gusset plate. And tension balanced compression supported tie bar.
منابع مشابه
Seismic Excitation of Steel Frame Retrofitted by a Multi-Panel PMC Infill Wall
A multi-panel PMC infilled system, using polymer matrix composite (PMC) material, was introduced as new conceptual design for seismic retrofitting. A proposed multi panel PMC infilled system was composed of two basic structural components: inner PMC sandwich infills and outer FRP damping panels. The PMC material had high stiffness-to-weight and strength-to-weight ratios. Therefore, the addition...
متن کاملexperimental investigation of masonry infilled reinforced concrete frame
an experimental study is conducted on three ½ scales, single-story, single-bay, frame specimens. the first specimen was a reinforced concrete frame with solid-brick infill. the second specimen was a reinforced concrete frame with hollow clay perforated-brick infill. the last specimen was a reinforced concrete frame without any infill. these three specimens were tested by pseudostatic method. di...
متن کاملSeismic Response of a Platform-Frame System with Steel Columns
Timber platform-frame shear walls are characterized by high ductility and diffuse energy dissipation but limited in-plane shear resistance. A novel lightweight constructive system composed of steel columns braced with oriented strand board (OSB) panels was conceived and tested. Preliminary laboratory tests were performed to study the OSB-to-column connections with self-drilling screws. Then, th...
متن کاملPerformance Evaluation of Curved-TADAS Damper on Seismic Response of Moment Resisting Steel Frame
In this study, the performance of triangular added damping and stiffness (TADAS) dampers combined with curved dampers (Curved-TADAS damper) is evaluated in moment resisting steel frame (MRSF). These dampers are passive and install in the beam-column connection region. Variable parameters of this study involve the width of curved damper (50, 75 and 100 mm), the thickness of TADAS damper (5 and 1...
متن کاملEffect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nihon Kenchiku Gakkai ko?zo?-kei ronbunshu?
سال: 2021
ISSN: ['1881-8153', '1340-4202']
DOI: https://doi.org/10.3130/aijs.86.1345