Experimental Study of Active Flow-Induced Vibration Control of Beam structure
نویسندگان
چکیده
منابع مشابه
Active vibration control of a piezoelectric beam using PID controller: Experimental study
Vibration suppression of smart beams using the piezoelectric patch structure is presented in the present work. The smart system consists of a beam as the host structure and piezoceramic patches as the actuation and sensing elements. An experimental set-up has been developed to obtain the active vibration suppression of smart beam. The set-up consists of a smart cantilever beam, the data acquisi...
متن کاملEfficiency of Active Control of Beam Vibration Using PZT Patches
This study is aimed to explore efficiency problems of using PZT patches in active vibration control of beams. The PZT patches are surface-bonded as actuators and strain gages are used as sensors. Distributed moment forcing mode is adopted to derive the control authority of actuators. Uniform beam model is applied when the mass and stiffness of PZT patches are ignored. Stepped beam model is then...
متن کاملActive Control of Turbulence-induced Helicopter Vibration
Helicopter vibration signatures induced by severe atmospheric turbulence ha\ e been shown to differ considerably from nominal, still air vibration. The perturbations of the transmission frequency have significant implications for the design of passive and active vibration alleviation devices, which are generally tuned to the nominal vibration frequency. This thesis investigates the existence of...
متن کاملEXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS
Aerodynamic drag is an important factor in vehicles fuel consumption. Pressure drag which is the main component of total drag is a result of boundary layer separation from vehicle surface. Flow control methods are applied to avoid or at least delay separation. Depending upon whether these methods consume energy to control the flow or not, they are called active or passive control methods. In th...
متن کاملActive Vibration Control of Smart Beam under Random Vibrations
Thepresent paper discusses active vibration control of a cantilever beam subjected to random base excitation. The smart materials used are piezoelectric patches for both as sensor and actuator, and actuation based on the surface strains. Finite element model of the smart beam is obtained using Euler-Bernoulli formulation. Positive Position Feedback (PPF) controller is proposed for active dampin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 2001
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.67.349