Experimental Studies on Surface Roughness of Nickel Alloy-286 by Extrusion Honing Process
نویسندگان
چکیده
منابع مشابه
The effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser
Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...
متن کاملThe effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser
Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...
متن کاملExperimental Study on the Surface Modification by Electrical Discharge Process
The creation of modified layer on metal surfaces using new methods is one of the procedures in surface engineering which can improve the surface mechanical properties. The electrical discharge process is a new method that can form a modified layer on the metal surfaces. This study aims to improve of pure aluminum surface properties through Electrical Discharge process with Monel 400 electrode. ...
متن کاملExperimental Investigation of the Influence of Burnishing Parameters on Surface Roughness and Hardness of Brass Alloy
Nanoparticles of iron oxide (Fe3O4) were obtained by Coprecipitation with synthesis time of 30, 60 and 90 min. The morphology of the samples was investigated by scanning electron microscopy (SEM) and structural characteristics were obtained by X-ray diffraction (XRD). The crystallite size was calculated from the spectrum X-ray diffraction with the application of the Scherrer equation and Winfit...
متن کاملExperimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder
Honing is a process for finishing surfaces to obtain smooth surface. This process is used for final polish of inner parts such as engines cylinders. Optimizing this process has always been a big challenge for mass production of cylinder blocks of internal combustion engines. Honing process has some variable parameters, thus to get their optimum rates the automobile cylinders were tested. In thi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2019
ISSN: 2321-9653
DOI: 10.22214/ijraset.2019.7027