Experimental investigation on mechanical properties of Al 7075/Al2O3/Mg NMMC’s by stir casting method
نویسندگان
چکیده
منابع مشابه
INVESTIGATION OF MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF 7075 AL ALLOYPREPARED BY SIMA METHOD
The microstructure and mechanical properties of 7075 wrought aluminum alloy produced by strain induced melt activation (SIMA) route were investigated.Also liquid volume fraction measurement was studied by three procedures. Remelting process was carried out in the range of 560 to 610 °C for 20 min holding. The microstructure in the semi-solid state consists of fine spherical solid grains surroun...
متن کاملOptimization of Microstructure and Mechanical Properties of Al-A360 Produced by Semi-Solid Casting
Semi-Solid Casting (SSM) is a new process that could produce globular structures with mechanical properties. The cooling slope method (CLM) is a one of this process that was employed to produce the A360 feedstock. In this method, The dendritic primary phase in the conventionally cast A356 alloy has transformed into a non-dendritic one. In this paper, The molten alloy with the temperature (PT) o...
متن کاملImproving of Microstructure and Mechanical Properties of Al-A356 Alloy with Compo-Casting Method
Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...
متن کاملExperimental investigation of Tool Geometry on Mechanical Properties of Friction Stir Welding of AA6061
AA 6061 has gathered wide acceptance in the fabrication of the light structures required to high strength. Compared to the fusion welding processes that are used for joining structural aluminium alloys, friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt and recast. In this experimental work, an extensive invest...
متن کاملExperimental Investigation of Mechanical and Tribological Properties of Al-sic and Al-gr Metal Matrix Composite
This Investigation studies the Mechanical and Tribological behaviour [ i.e dry sliding behaviour] of Al matrix composites reinforced with SiC and Gr particulate up to 10%, to study the effect of reinforcement, Load, Sliding speed and Sliding distance on stir cast Al-SiC and Al-Gr Metal matrix composites. Parametric studies indicate that the hardness, tensile strength of Al-SiC composite is grea...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sādhanā
سال: 2019
ISSN: 0256-2499,0973-7677
DOI: 10.1007/s12046-018-1021-9