Experimental Investigation of Metal Matrix Composite using Aluminium 7075
نویسندگان
چکیده
منابع مشابه
Micro structural aspects of Aluminium Silicon Carbide Metal Matrix Composite
The role of engineering materials in the development of modern technology need not be emphasized. As the levels of technology have become more and more sophisticated, the materials used also have to be correspondingly made more efficient and effective. The increasing use of Aluminium alloy materials in structural and space applications generated considerable interest for the development of tech...
متن کاملExperimental Investigation on Al 7075, TiB2, TiC, Metal Matrix Composites to find Power Consumption and MRR while Machining
Composite material is a combination of two or more materials having compositional variations and depicting properties distinctively different from those of the individual materials of the composite. A composite mixture having more than one fiber is known as hybrid composite During the past decade, considerable research effort has been directed towards the development of in situ Metal Matrices h...
متن کاملExperimental Investigation of Mechanical and Tribological Properties of Al-sic and Al-gr Metal Matrix Composite
This Investigation studies the Mechanical and Tribological behaviour [ i.e dry sliding behaviour] of Al matrix composites reinforced with SiC and Gr particulate up to 10%, to study the effect of reinforcement, Load, Sliding speed and Sliding distance on stir cast Al-SiC and Al-Gr Metal matrix composites. Parametric studies indicate that the hardness, tensile strength of Al-SiC composite is grea...
متن کاملPrimary Study on Machiability of Aluminium Matrix Composite using WEDM
The main goals of wire electrical discharge machining (WEDM) manufacturers and users are to achieve a better stability and high productivity of the manufacturing process. The investigation on machinability of Aluminium Matrix Composite (AMC) using Wire-cut Electric Discharge Machining (WEDM) machine is constructed. The aim of this project to determine the most optimum machining parameter that w...
متن کاملExperimental Investigation of Metal Powder Compaction without Using Lubricant
The main objective of this work was to design a novel device for compaction of metal powders so that the green parts could be ejected with applying a negligible force and without the need for any lubricant in either an admixed form or applied to the die wall. For this purpose a 40 mm diameter one-piece die was envisaged which would elastically contracted 0.076 mm before compaction and after com...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2021
ISSN: 2321-9653
DOI: 10.22214/ijraset.2021.34656