Experimental Investigation of GFRP-Reinforced and GFRP-Encased Square Concrete Specimens under Axial and Eccentric Load, and Four-Point Bending Test

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

Investigation of structural behaviour of GFRP reinforced concrete deck slabs through NLFEA

This paper presents a numerical study of the structural behaviour of concrete bridge deck slabs under static patch loads and dynamic traffic loads and an investigation of compressive membrane action (CMA) inside slabs. Those deck slabs were reinforced with Glass Fibre Reinforced Polymer (GFRP) bars. Non-linear finite element analysis (NLFEA) models were established using ABAQUS 6.10 software pa...

Flexural Behavior of GFRP Tubes Filled with Magnetically Driven Concrete

Experimental investigation of GFRP (glass fiber reinforced polymer) tubes that were filled with magnetically driven concrete was carried out to study the flexural behavior of specimens under bending. Specimens having different cross section and lengths were tested. The test specimens were fabricated by filling magnetically driven concrete into the GFRP tubes and the concrete was vibrated using ...

Acoustic Emission and Modal Frequency Variation in Concrete Specimens under Four-Point Bending

The Acoustic Emission (AE) and Dynamic Identification (DI) techniques were applied simultaneously, in an original way, to examine the stress dependent damage progress in pre-notched concrete beams tested in four-point bending. The damage mechanisms were characterized by analyzing the AE signals registered during the tests, conducted by increasing the specimen’s vertical deflection. In particula...

Flexural Behavior of Lightweight Concrete Beams Reinforced with GFRP Bars and Effects of the Added Micro and Macro Fiber

This study evaluated the effect of macro steel fiber (SF), micro glass fiber (GF) and micro polypropylene fiber (PF) in lightweight aggregate concrete, (LWAC) beams reinforced with glass fiber reinforced polymer (GFRP) bars. Firstly, concrete mixtures with different volume fractions of GF, PF and SF were tested up to compressive strength, then determine the optimum fiber content GF, PF and SF a...