Experimental and finite element vibration analysis of biaxial voided flat slab
نویسندگان
چکیده
منابع مشابه
Finite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling
In this research, finite element analysis of the conventional drilling and vibration assisted drilling is carried out. The ABAQUS software is employed for FE analysis. The Johnson-Cook models for both plastic deformation and damage are employed for FE simulation.The results of the FE analysis are then verified with experimental results in both conventional and vibration assisted drilling on Al ...
متن کاملFinite Element Analysis and Experimental Investigation on the Conventional and Vibration Assisted Drilling
In this research, finite element analysis of the conventional drilling and vibration assisted drilling is carried out. The ABAQUS software is employed for FE analysis. The Johnson-Cook models for both plastic deformation and damage are employed for FE simulation.The results of the FE analysis are then verified with experimental results in both conventional and vibration assisted drilling on Al ...
متن کاملA computer code for finite element analysis and design of post-tensioned voided slab bridge decks with orthotropic behaviour
Article history: Received 22 December 2008 Received in revised form 15 October 2009 Accepted 30 April 2010 Available online 8 June 2010
متن کاملStructural Analysis of a Three Span Continuous PC Voided Slab Deck by Three Dimensional Finite Element Method
The structural system of prestressed concrete (PC) voided slab deck is intermediate between plate and girder. Therefore, the conventional design method is based on the assumption that the system is similar to the plate system or to the grid system. In this paper, the structural behavior of a continuous PC voided slab deck with three spans was analyzed by using the three dimensional solid finite...
متن کاملExperimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle
The main aim of this research is to determine the best material for manufacturing of steering knuckle in order to reduce the weight using aluminum alloy and Metal Matrix Composite (MMC). To achieve this purpose, the Modal test has been performed to study vibrational behavior of steering knuckle. CAD Model has been prepared by using coordinate measuring machine (CMM). Finally, the Finite Element...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vibroengineering PROCEDIA
سال: 2017
ISSN: 2345-0533
DOI: 10.21595/vp.2017.19010