Experimental Analysis of Cutting Force Reduction During Ultrasonic Assisted Turning of Ti6Al4V
نویسندگان
چکیده
منابع مشابه
vibration cutting and elliptical ultrasonic vibration assisted turning of in738 work-pieces
vibration cutting (vc), elliptical vibration cutting (evc) and ordinary cutting (oc) of in738 work-pieces have been experimentally investigated in the present research. the experiments were carried out by using single crystal diamond tool and ultra-precision cnc lathe. vibration frequency is 36.16khz and the amplitude is . the influence of various cutting parameters including cutting speed, fee...
متن کاملEXPERIMENTAL ANALYSIS OF CNC TURNING OF NYLON USING TAGUCHI METHOD
Manufacturing process frequently employs optimization of machining parameters in order to improve product quality as well as to enhance productivity. The material removal rate is a significant indicator of the productivity and cost efficiency of the process. Taguchi method has been implemented for assessing favorable (optimal) machining condition during the machining of nylon by considering thr...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملDry Friction and Wear Performance of Micro Surface Textures Generated by Ultrasonic Assisted Face Turning
Nowadays the surface texturing has been widely recognized as a usable capability to improve the tribological systems. In this paper, ultrasonic assisted turning (UAT) isperformed to create the micro textures on the flat faces. Micro surface texturing ismade on the Al7075-T6 by the UAT in the face turning process. Then, the influences of cutting speed feed, vibration direction and vibration ampl...
متن کاملPrediction of cutting force in turning process: An experimental and fuzzy approach
This paper presents a comparison of experimental results and a fuzzy rule based system model for calculating the cutting force in the turning operation. A full bridge dynamometer was used to measure the cutting forces over the mild steel work piece and Cemented Carbide Insert tool for different combinations of cutting velocity, feed rate and depth of cut. The rake angle, approach angle and nose...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2018
ISSN: 2212-8271
DOI: 10.1016/j.procir.2018.08.227