Evaluation of mechanical properties of teak sawdust and PVC wood plastic composite
نویسندگان
چکیده
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولFlat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties
This study deals with the fabrication of composite matrix from saw dust (SD) and recycled polyethylene terephthalate (PET) at different ratio (w/w) by flat-pressed method. The wood plastic composites (WPCs) were made with a thickness of 6 mm after mixing the saw dust and PET in a rotary type blender followed by flat press process. Physical i.e., density, moisture content (MC), water absorption ...
متن کاملThermal and Dynamic-mechanical Properties of Wood-PVC Composites
The influence of maleation on thermal and dynamic-mechanical properties of wood-PVC composites was investigated in this study. Experimental results indicated that maleation had a significant influence on most of the properties for wood-PVC composites. Storage modulus (E’), loss modulus (E”), and complex modulus (E*) of resultant wood-PVC composites were related to the retention levels and graft...
متن کاملInvestigation on mechanical properties of composite made of sawdust and high density polyethylene
In this research, the effect of wood species and particle size on mechanicalproperties of wood plastic composites (WPC) made of fir (Abies alba) and beech(Fagus orientalis L.) sawdust and high density polyethylene (HDPE) wereinvestigated. Wood plastic composite (WPC) were made with 30% HDPE in abatch process at 185˚C, at two particle sizes of 40 mesh and 80 mesh. Maleicanhydride polypropylene (...
متن کاملMechanical Properties of Composite Mortars Using Flurogypsum and PVC Particles
The present work describes the viability of a mortar binder based on two industrial by-products: poly(vinyl chloride) (PVC) particles from scrap and anhydrite (CaSO4) from fluorgypsum. Mortar composites were made incorporating different amounts of PVC particles and cured at constant room temperature during various periods of time. From X-ray diffraction, it was possible to follow the hydration ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering, Science and Technology
سال: 2020
ISSN: 2141-2839,2141-2820
DOI: 10.4314/ijest.v12i2.6