Evaluation of Internal Strain Distribution in Glass-Short-Fiber Reinforced Plastics by Synchrotron Strain-Scanning Method
نویسندگان
چکیده
منابع مشابه
Short-carbon-fiber-reinforced epoxy as a piezoresistive strain sensor
Epoxy containing 5.5 vol.% short carbon fibers was found to be piezoresistive strain sensor, such that the magnitude of the reversible fractional increase in electrical resistance per unit strain was 6-23 under tension and 29-31 under compression. These values are much higher than those of previously reporied composite piezoresistive materials. The reversible fractional increase in resistance w...
متن کاملWoven Glass Fiber-Reinforced
ment methods and two spec/imen diameters. Flexural strength and modulus of woven glass fiber-reinforced specimens werc significanLly greater than those without woven glass fiber (p<O.OD, Likewise, comprossive strength of reinforced specimens was signifieantly greater than those without woven glass fiber (p<O.Ol), except for specimens rcjnforced with woven glass fiber oriented at a tilt directio...
متن کاملSkin problems among fiber-glass reinforced plastics factory workers in Japan.
Two surveys, one in winter the other in summer time, examined the skin problems of the entire manual workers (N=148) from 11 small-to-medium sized fiber-glass reinforced plastics (FRP) factories located in Kyushu, Japan. The workers were exposed to unsaturated polyester resin, including styrene and auxiliary agents such as cobalt naphthenate, hardeners such as methyl ethyl ketone peroxides, gla...
متن کاملColor stability of laboratory glass-fiber-reinforced plastics for esthetic orthodontic wires
OBJECTIVE In our previous study, glass-fiber-reinforced plastics (GFRPs) made from polycarbonate and glass fibers were prepared for esthetic orthodontic wires using pultrusion. These laboratory GFRP wires are more transparent than the commercially available nickel-titanium wire; however, an investigation of the color stability of GFRP during orthodontic treatment is needed. Accordingly, in the ...
متن کاملExperimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)
The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 2020
ISSN: 0514-5163,1880-7488
DOI: 10.2472/jsms.69.300