Evaluation of Diffusion Creep in Low Melting Point Materials by Nanoindentation Creep Test
نویسندگان
چکیده
منابع مشابه
Mechanosorptive creep in nanocellulose materials
The creep behavior of nanocellulose films and aerogels are studied in a dynamic moisture environment, which is crucial to their performance in packaging applications. For these materials, the creep rate under cyclic humidity conditions exceeds any constant humidity creep rate within the cycling range, a phenomenon known as mechanosorptive creep. By varying the sample thickness and relative humi...
متن کاملSimilarity Relationships in Creep Contacts and Applications in Nanoindentation Tests
The study of indentation responses of rate-dependent (viscoplastic or creeping) solids has generally focused on the relationship between indentation hardness and an effective strain rate, which can be defined from a similarity transformation of the governing equations. The strain rate sensitivity exponent can be determined from the slope of a log-log plot of the hardness versus effective strain...
متن کاملWater weakening of clinopyroxenite in diffusion creep
[1] We performed triaxial compressive creep tests to study water weakening of clinopyroxenite in the diffusion creep regime. All tests were carried out on fine-grained samples at confining pressures between 100 and 300 MPa at temperatures of 1321 to 1421 K for water-saturated and 1398 to 1508 K for anhydrous conditions. Samples were prepared by hot-pressing ground powder of Sleaford Bay clinopy...
متن کاملEvaluation of Asphalt Mixture Low-Temperature Performance in Bending Beam Creep Test
Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test...
متن کاملDiffusion creep of dry, melt-free olivine
[1] Deformation experiments were conducted on fine-grained (3–6 mm), fully synthetic Fo90 olivine aggregates in a gas-medium apparatus at 300 MPa confining pressure and temperatures of 1150–1360 C. The strain rates of the solution-gelation-derived and therefore genuinely melt-free, dry samples are about two orders of magnitude lower than the strain rates for nominally melt-free aggregates at th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2005
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.71.1285