Etching Charactristic of LiNbO3 Crystal in Fluorine System Gas Plasma RIE
نویسندگان
چکیده
منابع مشابه
An experimental study of the reactive ion etching (RIE) of GaP using BCl3 plasma processing
A detailed study of the reactive ion etching (RIE) of GaP, through BCl3 based plasma processing is reported. We discuss the effects on the etch ate through the studies of RF power, reactant and carrier gas (Ar) flow and chamber pressure. Atomic force microscopy (AFM) characterization, long with photoluminescence (PL) spectroscopy, is used to investigate the surface quality and correlate the mat...
متن کاملElectroplated Ni mask for plasma etching of submicron-sized features in LiNbO3
We here report on the fabrication of electroplated nickel (Ni) masks for dry etching of sub-micron patterns in lithium niobate (LiNbO3). This process allows obtaining a 350-nm thick Ni mask defining high air filling fraction holey arrays (e.g. openings of 1800 nm in diameter with inter-hole spacing of 300nm, or 330-nm diameter holes spaced by 440-nm). The mask profile is perfectly vertical (ang...
متن کاملAnisotropic Dry Etching ( RIE ) for Micro and Nanogap Fabrication
The main objective of this research is to develop a micro and nanogap structure using dry anisotropic etching –Reactive Ion EtchingRIE. Amorphous silicon material is used in the micro and nanogap structure and gold as electrode. The fabrication processes of the micro and nanostructure are based on conventional photolithography, wet etching for the Al pattern and wet etching for a-Si pattern usi...
متن کاملSimultaneous bandgaps in LiNbO3 phoxonic crystal slab.
We study simultaneous photonic and phononic crystal slabs created in Z-cut lithium niobate membranes. Bandgaps for guided waves are identified using the three-dimensional finite element method (FEM). Three lattices are considered: the square, the hexagonal, and the honeycomb lattices. We investigate the evolution of band gaps as a function of geometrical parameters such as hole radius and membr...
متن کاملLow sidewall damage plasma etching using ICP-RIE with HBr chemistry of Si=SiGe resonant interband tunnel diodes
The effect and influence of dry plasma etching processes of Si=SiGe using HBr for the formation of diode mesa structures has been investigated to minimise sidewall leakage current. To characterise sidewall damage electrically, Si-based resonant interband tunnel diodes (RITD) were processed and the completed RITDs compared by their peak-to-valley current ratio (PVCR) and valley current density (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 2000
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms1990.120.2_198