Estimation of FBR MONJU's Average Fuel Temperatures and Fuel-to-coolant Heat Transfer Coefficients using Trip-Test Data.

بوزدایی از ‏‎fuel oil deodorization of fuel oil‎‏

مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در ‏‎fuel oil‎‏ عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی ‏‎fuel oil‎‏ تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...

Fuel Burn Estimation Using Real Track Data

A procedure for estimating fuel burned based on actual flight track data, and drag and fuel-flow models is described. The procedure consists of estimating aircraft and wind states, lift, drag and thrust. Fuel-flow for jet aircraft is determined in terms of thrust, true airspeed and altitude as prescribed by the Base of Aircraft Data fuel-flow model. This paper provides a theoretical foundation ...

Single-phase Coolant Flow and Heat Transfer

1) Hydraulic Analysis of the Emergency Core Spray System in a BWR The emergency spray system of a BWR delivers cold water to the core after a large-break loss of coolant accident has emptied the reactor vessel. The system comprises a large water pool, a pump, a spray nozzle and connecting pipes (Figure 1). All pipes are smooth round tubes made of stainless steel with 10 cm internal diameter. Th...

Cfd Study on Coolant Mixing in Vver-440 Fuel Rod Bundles and Fuel Assembly Heads

A CFD model of VVER-440 fuel assembly heads was developed based on the technical documentation of a full-scale test facility built in the Kurchatov Institute, Moscow. Steady-state and transient calculations were performed to validate the model with a measurement set and investigate the effects of the spatial discretization, choosing of different turbulence models and use of different inlet boun...

Electrodeposition of charged particles onto fuel cell coolant channel walls