Equipment for thermo-mechanical contact fatigue in rolling conditions determination

Rolling Contact Fatigue in Ultra High Vacuum

Thermo-Mechanical Fatigue Crack Growth of RR1000

Non-isothermal conditions during flight cycles have long led to the requirement for thermo-mechanical fatigue (TMF) evaluation of aerospace materials. However, the increased temperatures within the gas turbine engine have meant that the requirements for TMF testing now extend to disc alloys along with blade materials. As such, fatigue crack growth rates are required to be evaluated under non-is...

Thermo-Mechanical Fatigue Life Assessment of a Diesel Engine Piston

Analysis of Surface Crack Growth under Rolling Contact Fatigue

Understanding the fatigue crack growth phenomenon in railheads requires a study of driving forces such as the crack tip opening and sliding displacements, under repeated rolling contact. Finite element simulations, allowing elastic-plastic deformation, and mixed-mode crack growth laws were utilized to demonstrate that the fatigue crack growth rates display a minimum after a finite amount of cra...

Rolling contact fatigue of surface coatings—a review

The aim of this review is to survey the state of the art relating to the rolling contact fatigue (RCF) investigation of various overlay coatings and also, to ascertain the influence of design parameters such as the type of deposition process, coating material and thickness on the RCF performance. Rolling contact fatigue is a significant factor in the failure of components in rolling/sliding con...