Enhancement of Vibration Energy Harvesting Performance by Omni-Directional INVELOX Wind Funnel: A Computational Study
نویسندگان
چکیده
An alternate renewable energy source, through a piezoelectric vibration harvester with bluff splitter body, could lead to higher efficiency in harvesting, vortex-induced at near-resonance condition 20 m/s high wind speed. However, is not as popular solar energy, the main source Malaysia, due relatively low speed available country. The INVELOX machine, introduced 2014, was one of most recent systems used harvest power by accelerating This omni-directional funnel capture from all directions and tunnel it convergent-divergent nozzle, where coupled body (PVEH) are located its venturi throat, which an increase fulfil task VIV harvesting. proposed modified design found achieve 2.7 times amplification venturi, outperformed previously designs. To optimum for PVEH plate, free-stream 7.4 recommended. integration plate expected maximum voltage output 20.99 V or 4.96 V, 0.82mW m/s.
منابع مشابه
A study of several vortex-induced vibration techniques for piezoelectric wind energy harvesting [7977-14]
This paper discusses a preliminary study on harnessing energy from piezoelectric transducers by using bluff body and vortex-induced vibration phenomena. Structures like bridges and buildings tend to deform and crack due to chaotic fluid-structure interactions. The rapid variation of pressure and velocity can be tapped and used to power structural health monitoring systems. The proposed device i...
متن کاملVibration energy harvesting by magnetostrictive material
A new class of vibration energy harvester based on magnetostrictive material (MsM), Metglas 2605SC, is designed, developed and tested. It contains two submodules: an MsM harvesting device and an energy harvesting circuit. Compared to piezoelectric materials, the Metglas 2605SC offers advantages including higher energy conversion efficiency, longer life cycles, lack of depolarization and higher ...
متن کاملA periodic folded piezoelectric beam for efficient vibration energy harvesting
Periodic piezoelectric beams have been used for broadband vibration energy harvesting in recent years. In this paper, a periodic folded piezoelectric beam (PFPB) is introduced. The PFPB has special features that distinguish it from other periodic piezoelectric beams. The Adomian decomposition method (ADM) is used to calculate the first two band gaps andtwelve natural frequencies of the PF...
متن کاملActive Omni-directional Piezoelectric Energy Harvesting System for Wireless Monitoring on Electrical Traction Shearer
For communication and energy supply problems caused by sensors wiring in condition monitoring, a novel wireless monitoring system based on Piezoelectric Energy Harvesting (PEH) and Wireless Sensor Network (WSN) were proposed to realize self-powered and intelligent detection of electrical traction shearer. With the maximum power accumulated from kinetic energy, the working condition monitoring s...
متن کاملBroadband Vibration Energy Harvesting Techniques
The continuous reduction in power consumption of wireless sensing electronics has led to immense research interests in vibration energy harvesting techniques for self-powered devices. Currently, most vibration-based energy harvesters are designed as linear resonators that only work efficiently with limited bandwidth near their resonant frequencies. Unfortunately, in the vast majority of practic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied sciences
سال: 2022
ISSN: ['2076-3417']
DOI: https://doi.org/10.3390/app12168319