ENGINEERING PROPERTIES OF LIGHTWEIGHT GEOPOLYMER CONCRETE USING PALM OIL CLINKER AGGREGATE
نویسندگان
چکیده
منابع مشابه
Rapid Chloride Permeability Test on Lightweight Concrete Made with Oil Palm Clinker
This paper presents an experimental program on rapid chloride permeability test on lightweight concrete produced from oil palm clinker aggregates. Oil palm clinker is obtained from by-product of palm oil milling. Utilising oil palm clinker in concrete production not only solves the problem of disposing this solid waste but also help to converse natural resources. The parameter of investigation ...
متن کاملProperties of Green Lightweight Aggregate Concrete
With increasing concern over the excessive exploitation of natural aggregates, synthetic lightweight aggregate produced from environmental waste is a viable new source of structural aggregate material. The uses of structural grade lightweight concrete reduce considerably the self-load of a structure and permit larger precast units to be handled. In this paper, the mechanical properties of a str...
متن کاملEffects of Oil Palm Shell Coarse Aggregate Species on High Strength Lightweight Concrete
The objective of this study was to investigate the effects of different species of oil palm shell (OPS) coarse aggregates on the properties of high strength lightweight concrete (HSLWC). Original and crushed OPS coarse aggregates of different species and age categories were investigated in this study. The research focused on two OPS species (dura and tenera), in which the coarse aggregates were...
متن کاملPrediction of Lightweight Aggregate Concrete Compressive Strength
Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method. One of the main methods of non-destructive testing in the assessment of compressive strength...
متن کاملFly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent
In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of GEOMATE
سال: 2020
ISSN: 2186-2982,2186-2990
DOI: 10.21660/2020.65.89948