Embedded Strain Gauges for Condition Monitoring of Silicone Gaskets
نویسندگان
چکیده
منابع مشابه
Embedded Strain Gauges for Condition Monitoring of Silicone Gaskets
A miniaturized strain gauge with a thickness of 5 µm is molded into a silicone O-ring. This is a first step toward embedding sensors in gaskets for structural health monitoring. The signal of the integrated sensor exhibits a linear correlation with the contact pressure of the O-ring. This affords the opportunity to monitor the gasket condition during installation. Thus, damages caused by faulty...
متن کاملHysteresis and Material Effects of Printed Strain Gauges Embedded in Organic Coatings
This work reports on the hysteresis behavior and an initial baseline drift of printed strain gauges embedded in organic coating layers on sheet steel that we recently introduced. We subsequently investigated the performance over an extended period of time, which revealed interesting and partially unexpected material properties of printed strain gauges made from silver and carbon. Both silverand...
متن کاملNonlinearity and Hysteresis of Resonant Strain Gauges
Nonlinearity and hysteresis effects of electrostatically activated, voltage driven resonant microbridges have been studied theoretically and experimentally. It is shown, that, in order to avoid vibration instability and hysteresis to occur, the choices of the ax . and d.c. driving voltages and of the quality factor of a resonator, with a given geometry and choice of materials, are limited by a ...
متن کاملDistributed embedded condition monitoring systems based on OSA-CBM standard
This paper presents an approach to distributed condition monitoring systems that offers a reusable software architecture for a class of condition monitoring (CM) applications. The focus of this paper deals with an open software framework for development of CM applications stemming from 1) the Open System Architecture for Condition Based Maintenance (OSA-CBM) specification, which is an architect...
متن کاملNovelty Detection for Flight Data from Airframe Strain Gauges
The structural health of airframes is often monitored by analysis of the frequency of occurrence matrix (FOOM) produced after each flight. Each cell in the matrix records a stress event of a particular severity. These matrices are used to determine how much of the aircraft’s life has been used up in each flight. Unfortunately, the sensors that produce this data are subject to degradation themse...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2014
ISSN: 1424-8220
DOI: 10.3390/s140712387