Electrostatic injection kicker for the KEK digital accelerator
نویسندگان
چکیده
منابع مشابه
RHIC Injection Kicker Impedance
The RHIC injection kicker is a pulsed transmission line kicker, consisting of 15 ferrite sections and 14 ceramic sections. The length of the kicker is 1.1 m and there are 4 such units in each ring. Figure 1 shows the kicker cross section with the outer conductor, C-shaped ferrite, inner conductor and the ceramic beam pipe [1]. The design characteristic impedance of the transmission line kicker ...
متن کاملSpear 3 Injection Kicker
The design of the SPEAR 3 injection kicker system is presented. This system will include three kicker magnets and their associated pulsers. The magnet design is based on the DELTA kicker magnets, which present a low RF impedance to the beam, and are relatively straightforward to construct. The pulsers use cascaded IGBT stages that are based on the modulator pulsers developed by a SLAC/LLNL coll...
متن کاملDevelopment of the C(6+) laser ablation ion source for the KEK digital accelerator.
A laser ion source that provides a fully ionized carbon ion beam is under joint development at the High Energy Accelerator Research Organization and Brookhaven National Laboratory. Long-pulse (6 ns) and short-pulse (500 ps) laser systems were tested by using them to irradiate a graphite target. Notable differences between the systems were observed in these experiments. Preliminary experimental ...
متن کاملDesign Concept for Ags Injection Kicker
Knoxville, May 16–20 May 2005 DESIGN CONCEPT FOR AGS INJECTION KICKER UPGRADE TO 2 GEV* R.B. Armenta, M.J. Barnes, E.W Blackmore, O. Hadary, G.D. Wait, TRIUMF, Vancouver, B.C., L. Ahrens, C.J. Gardner, W. Zhang, Brookhaven National Laboratory, Upton, NY Abstract The present AGS injection kickers at A5 location were designed for 1.5 GeV proton injection. Recent high intensity runs have pushed th...
متن کاملA Fast Injection Kicker Magnet for the Tevatron
A new proton injection kicker system is required for the Tevatron in the Run II era. The new system was designed to supply 1.25 kG-m into a magnetic aperture of 48 mm vertical x 71 mm horizontal x 5 m long with a 396 ns bunch spacing. The system is configured to be upgraded to a bunch spacing of 132 ns with additional pulsed power supplies. The design of the magnet incorporated some novel featu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review Special Topics - Accelerators and Beams
سال: 2013
ISSN: 1098-4402
DOI: 10.1103/physrevstab.16.053501