Electrophoretic deposition of Al-CuOx thermite materials on patterned electrodes for microenergetic applications

نویسندگان

چکیده

In this paper, the features and main nuances of electrophoretic deposition energetic nanoscale powder materials based on Al CuOx were investigated formulated. We have successfully demonstrated advantage using suspension non-stop ultrasonic mixing horizontal electrode placement during deposition. The possibility local an electrically conductive topological pattern was shown. influence mass deposited material behavior wave combustion process a locally formed investigated. This study provides guidance for multiobjective optimization increasing reproducibility materials. results indicate that Al-CuO x mixture can be integrated into microenergy systems as with excellent specific energy characteristics high rate.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrophoretic Deposition of Hydroxyapatite

     The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...

متن کامل

Electrophoretic Deposition: Fundamentals and Applications

This article presents a study on the growth process for the template-based growth of TiO2 nanorods by sol electrophoretic deposition, through both experiment and simulation. Uniformly sized nanorods of approximately 45–200 nm in diameter and 10–60 μm in length can be grown over large areas with near unidirectional alignment. The nanorods have the desired stoichiometric chemical composition and ...

متن کامل

A review on fundamentals and applications of electrophoretic deposition (EPD)

This review encompasses the fundamental aspects of electrophoretic deposition technique, factors influencing the deposition process, kinetic aspects, types of EPD, the driving forces, preparation of electrophoretic suspension, stability and control of suspension, mechanisms involved in EPD, multicomponent/composite deposition, drying of deposits obtained by EPD. Numerous applications including ...

متن کامل

Electrochemical and electrophoretic deposition of hydroxyapatite for orthopaedic applications

The basic calcium phosphate mineral, hydroxyapatite (HAP) (Ca10(PO4)6(OH)2)), is the prototype of one of the major constituents of bone and teeth. Thin layers of HAP were coated on the surface of type 316L stainless steel by electrophoretic deposition (EPD) from a 2.5% suspension in isopropyl alcohol, and this was followed by vacuum sintering at 800uC for 1 h. The development of HAP coatings wa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: E3S web of conferences

سال: 2021

ISSN: ['2555-0403', '2267-1242']

DOI: https://doi.org/10.1051/e3sconf/202123900015