Electrochemical Behavior of Electrodeposited Zinc-Iron Alloys in 5%NaCl Solution
نویسندگان
چکیده
منابع مشابه
The Electrochemical Behavior of Al Alloys in NaCl Solution in the Presence of Pyrazole Derivative
This paper studies the corrosion inhibition of Al-Mg alloy system in 0.5 mol/dm3 NaCl solution in the presence of pyrazole derivative using potentiodynamic polarization and linear polarization method. The inhibition efficiency as a function of concentration and temperature was investigated. From the polarization curves, it can be concluded that the pyrazole derivative be...
متن کاملElectrodeposited Iron Group Thin-Film Alloys Structure-Property Relationships
Various iron group alloys have been electrodeposited and evaluated for properties including corrosion resistance, microstructure, electrical resistivity, magnetoresistance and other magnetic properties. Corrosion resistance depends on deposit composition and microstructure, which are controlled by solution composition and deposition variables. Maximum corrosion resistance was observed for 50Ni5...
متن کاملElectrochemical and Spectroscopic Study of Benzotriazole Films Formed on Copper, Copper-zinc Alloys and Zinc in Chloride Solution
The formation of protective layers on copper, zinc and copper-zinc (Cu-10Zn and Cu-40Zn) alloys at open circuit potential in aerated, near neutral 0.5 M NaCl solution containing benzotriazole (BTA) was studied using potentiodynamic measurements, electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS). The addition of benzotriazole affects the dissolution of the m...
متن کاملElectrochemical Deposition of γ-Phase Zinc-Nickel Alloys from Alkaline Solution
Zinc-nickel alloys with 8-15% nickel were deposited onto stainless steel for corrosion protection. Alkaline deposition conditions were utilized given that alkaline systems have been found to offer superior substrate coverage which results in better corrosion protection of the metal substrate (stainless steel) compared to acid bath depositions. This method utilizes ammonium hydroxide as the base...
متن کاملElectrochemical Behavior of Alloys for Fixed Partial Denture
The electrochemical behaviors of eight parent alloys and four post-solder alloys used in dental prostheses were specified in a (pH=7.4; [NaCl]=9g/L)-aqueous solution at 37°C. For each alloy, the free potential was followed during two hours, and a cyclic polarization between the cathodic domain and the solvent’s oxidation was performed. The galvanic corrosion between each parent alloy and its us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1991
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.77.2_244