Electrical Discharge Machining of SiC Reinforced 6061-T6 Aluminum Alloy Surface Composite Fabricated by Friction Stir Processing
نویسندگان
چکیده
Engineered materials with high hardness, great wear tolerance, high-temperature power, and a low thermal expansion coefficient are aluminum-based composites. These widely used in the automotive aerospace industries. Friction stir processing (FSP) method to prepare SiC reinforced aluminium alloy surface composite. Material removal rate (MRR) roughness (SR) measured impact of pulse on time, discharge current, off time (add one or two outcomes remark at SR MRR optimal condition) is examined. For each three machining parameters, L9 orthogonal arrays (OA) levels were conducting experiments. The validity Aluminum Surface Composite experiment programme determined using MINITAB.
منابع مشابه
Two-dimensional Mapping of Residual Strains in 6061-t6 Aluminum Alloy Friction Stir Welds
The residual strain profiles were measured through the thickness of friction-stir welded (FSW) plates using neutron diffraction to study the relationship between the angular distortion and the residual strain distribution. Three different weld specimens were prepared from a 6061-T6 aluminum alloy with the purpose of separating the effects of the frictional heat and plastic deformation on the re...
متن کاملFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملThree-dimensional Composite Lattice Structures Fabricated by Electrical Discharge Machining
We present a novel method for fabricating carbon fiber composite sandwich panels with lattice core construction by means of electrical discharge machining (EDM). First, flattop corrugated carbon fiber composite cores were fabricated by a hot press molding method. Then, two composite face sheets were bonded to each corrugated core to create precursor sandwich panels. These panels were transforme...
متن کاملFuzzy Modeling for Electrical Discharge Machining of Aluminum Alloy
Electrical discharge machining (EDM) is widely used process in the production of mould / dies, aerospace, automobile and electronics industries where intricate complex shapes need to be machined in very hard materials. The selection of the AISI 64430 was made taking into account its wide range of applications in the industrial field: defense, pharmaceutical, aerospace, shipbuilding industries e...
متن کاملFriction Stir Processing of Particle Reinforced Composite Materials
The objective of this article is to provide a review of friction stir processing (FSP) technology and its application for microstructure modification of particle reinforced composite materials. The main focus of FSP was on aluminum based alloys and composites. Recently, many researchers have investigated this technology for treating other alloys and materials including stainless steels, magnesi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202130901044