Electrical conductivity anisotropy of copper matrix composites reinforced with SiC whiskers
نویسندگان
چکیده
منابع مشابه
Casting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملProduction of titanium matrix composites reinforced with SiC particles
Vienna University of Technology, Institute of Materials Science and Technology, Karlsplatz 13/308, 1040 Vienna, Austria b The Slovak Academy of Sciences, Institute of Materials and Machine Mechanics, Račianska 75, 83102 Bratislava, Slovak Republic Branch Lab Dresden of the Fraunhofer Institute for Manufacturing and Advanced Materials, Winterbergstrabe 28, 01277 Dresden, Germany Austrian Researc...
متن کاملFilament/Matrix Interaction of Titanium-Matrix Composites Reinforced with SiC Fibers
Fiber reinforced metal composites were fabricated by diffusion welding. The matrices used were commercially pure titanium (CPTi) and two kinds of titanium alloys (Ti-6A1-4V and Ti-21V-4A1), and the filaments were two kinds of SiC-CVD fiber. The structure and the distribution of elements in reaction zone between matrix and filament both in as-fabricated state and in heat-treated state were inves...
متن کاملGrinding of Aluminium-Based Metal Matrix Composites Reinforced with Al2O3 or SiC Particles
This paper presents results obtained from the grinding of aluminium-based metal matrix composites reinforced with either aluminium oxide (Al2O3) or silicon carbide (SiC) particles using grinding wheels made of SiC in a vitrified matrix or diamond in a resin-bonded matrix. The study used grinding speeds of 1100–2200 m min , a grinding depth of 15 m for rough grinding and 0.1–1 m for fine grindin...
متن کاملApplication of Electrophoretic Deposition for Interfacial Control of High-Performance SiC Fiber-Reinforced SiC Matrix (SiCf/SiC) Composites
This chapter reviews the novel fabrication process of continuous SiCf /SiC composites based on electrophoretic deposition (EPD). EPD process is very effective for achieving relatively homogeneous carbon coating with the thickness of several tens to hundreds nanometers on SiC fibers. Carbon interface with the thickness of at least 100 nm formed by EPD acts effectively for inducing interfacial de...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanotechnology Reviews
سال: 2019
ISSN: 2191-9097
DOI: 10.1515/ntrev-2019-0027