Electric characteristics of pseudo-spark during breakdown phase
نویسندگان
چکیده
منابع مشابه
The Study of Breakdown Voltages for Triggered Spark Gap Switches
This study explains the breakdown mechanism in different triggered spark gap switches. Two different trigger electrode configurations are tested for the switch predischarge operation in a nitrogen laser circuit. The behavior of the breakdown voltage, when a trigger pulse is applied to the trigger electrode, is investigated, and the results are reported. Based on the experimental measurements ne...
متن کاملElectric Field Breakdown Characteristics of Carbon-based Ion Optics
Ion thrusters are being designed for long-term operation at power, specific impulse, and thrust levels of up to 29 kW, 7000 seconds, and 0.64 N, respectively. The total propellant throughput goal of these thrusters is nearly 100 kg/kW, which corresponds to ~100 khr of operation. Carbon-based grids have been chosen as the baseline design to achieve this propellant throughput and life time goal. ...
متن کاملHigh Pressure Spark Gap Recovery after Overvolted Breakdown
A spark gap at pressures from 100 kPa to 7 MPa with various gases is fired by overvolting the electodes. The recovery of the gap is studied using a second identical pulse to test the voltage holdoff during the recovery period. A TV camera, interferometer and a spinning mirror camera are also used to record arc locations and density profiles. The gas is stationary during the recovery. Breakdown ...
متن کاملContinuous emissions monitoring using spark-induced breakdown spectroscopy.
A new technology for monitoring airborne heavy metals on aerosols and particulates based on spark-induced breakdown spectroscopy (SIBS) was evaluated at a joint U.S. Environmental Protection Agency (EPA)/U.S. Department of Energy test at the rotary kiln incinerator simulator (RKIS) facility at EPA/Research Triangle Park, NC, in September 1997. The instrument was configured to measure lead and c...
متن کاملSimulation of thermal and electric field evolution during spark plasma sintering
Finite element simulations have been conducted to determine the temperature distribution (both in radial and axial direction), heat and electric flux-field in the powder compact/die/punch assembly during the spark plasma sintering (SPS) process. A thermal–electrical coupled model with temperature dependent thermal and electrical properties is implemented. The simulation studies were conducted u...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics D: Applied Physics
سال: 1993
ISSN: 0022-3727,1361-6463
DOI: 10.1088/0022-3727/26/7/007