Efficiencies of a Pulse-tube Refrigerator and Heat-driven Thermoacoustic Cooler

10K Pulse Tube Cooler

A 3-stage pulse tube cooler has been designed to operate at 10¶K. The staged cooler uses the same compressor and parallel staging configuration for the 1 st and 2 nd stages as previously employed for our delivered High Capacity Cryocooler (HCC). The 2 nd and 3 rd stages are in a serial configuration. The addition of the third stage extends the performance of this cooler to lower operating tempe...

Influence of the Water-Cooled Heat Exchanger on the Performance of a Pulse Tube Refrigerator

The water-cooled heat exchanger is one of the key components in a pulse tube refrigerator. Its heat exchange effectiveness directly influences the cooling performance of the refrigerator. However, effective heat exchange does not always result in a good performance, because excessively reinforced heat exchange can lead to additional flow loss. In this paper, seven different water-cooled heat ex...

Optimization of thermoacoustic engine driven thermoacoustic refrigerator using response surface methodology

Thermoacoustic engines (TAEs) are devices which convert heat energy into useful acoustic work whereas thermoacoustic refrigerators (TARs) convert acoustic work into temperature gradient. These devices work without any moving component. Study presented here comprises of a combination system i.e. thermoacoustic engine driven thermoacoustic refrigerator (TADTAR). This system has no moving componen...

Optimizing the Design of a Thermoacoustic Refrigerator

The experimental studies of thermoacoustic cooler.

The experimental studies of thermoacoustic cooler consisting of acoustic loop-tube were carried out. The loop-tube was filled with the mixture of air and helium gas or air at atmospheric pressure. The dimensions of the loop-tube were 3.3 m of length, 44 mm of inner diameter and 4 mm of thickness. A pair of stacks (stack 1 and stack 2) which were sandwiched between two heat exchangers was placed...