Effects of environment and stress concentration factor on Ti-6Al-4V specimens subjected to quasi-static loading
نویسندگان
چکیده
منابع مشابه
Fatigue of Ti-6Al-4V
Metallic biomaterials have essentially three fields of use; these are the artificial hip joints, screw, plates and nails for internal fixation of fractures, and dental implants. Any of these devices must support high mechanical load and resistance of material against breakage is essential. High mechanical properties are needed for structural efficiency of surgical and dental implants. But their...
متن کاملFlow Behaviour of Ti-6Al-4V Subjected To Step Temperature Isothermal Forging
Three different samples of Ti -6Al-4V of size 10mm diameter x15mm height compressed at a strain rate of 102 sec -1 in a 100KN servo hydraulic machine (DARTEC, UK make) with three different initial temperatures. First specimen of Ti-6Al-4V was compressed at an initial temp 1123K from initial length 15 mm to 10mm then the temperature was reduced to 1073K and compressed to a length of 7 mm now the...
متن کاملOsteoblastic behavior to zirconium coating on Ti-6Al-4V alloy
PURPOSE The purpose of this study was to assess the surface characteristics and the biocompatibility of zirconium (Zr) coating on Ti-6Al-4V alloy surface by radio frequency (RF) magnetron sputtering method. MATERIALS AND METHODS The zirconium films were developed on Ti-6Al-4V discs using RF magnetron sputtering method. Surface profile, surface composition, surface roughness and surface energy...
متن کاملSize-dependent Effects on the Vibration Behavior of a Ti-moshenko Microbeam subjected to Pre-stress Loading based on DQM
In this paper, size-dependent effects on the vibration behavior of Timoshenko microbeams under pre-stress loading embedded in an elastic foundation, using modified strain gradient theory (MSGT) and surface stress effects, were studied. To consider the surface stress effects, the Gurtin–Murdoch continuum mechanical approach was employed. Using Hamilton’s principle, the governing equations of mot...
متن کاملDurability of Fe-Co Thin Films on Ti-6Al-4V
The durability of Fe-Co thin films bonded on Ti-6Al-4V was studied as a function of layer thickness at ambient temperature. Interface toughness of the thin films was characterized by indentation and analyzed using an interface fracture model. The critical stresses for interface debonding and the fatigue life response of Ti-6Al-4V with and without Fe-Co thin films were evaluated by three-point b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Structural Integrity
سال: 2018
ISSN: 2452-3216
DOI: 10.1016/j.prostr.2018.11.097